Description

Fluke 434 3 Phase Power Quality Analyser

Fluke 434 3 Phase power quality meter help you locate, predict, prevent and troubleshoot problems in power distribution systems. These easy-to-use power quality tools are a ﾓmust haveﾔ for any person who maintains or troubleshoots three phase power. The new IEC Class A standards for flicker and power quality are built right in to take the guess work out of power monitoring.

Applications Fluke 434 3 Phase

• Frontline troubleshooting ﾖ quickly diagnose problems on-screen to get your operation back online
• Predictive maintenance ﾖ detect and prevent power quality issues before they cause downtime
• Quality of service compliance ﾖ validate incoming power quality at the service entrance
• Long-term analysis ﾖ uncover hard-to-find or intermittent issues
• Load studies ﾖ verify electrical system capacity before adding loads
• Energy assessments ﾖ quantify energy consumption before and after improvements to justify energy saving devices

Fluke 434 3 Phase Energy Analyzer offer the best in power quality analysis and introduce, for the first time ever, the ability to monetarily quantify energy losses.

• Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available).
• Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp.
• PowerWave data capture: capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).
• Waveform capture: capture 100/120 cycles (50/60Hz) of each event that is detected in all modes, without set-up.
• Automatic Transient Mode: capture 200 kHz waveform data on all phases simultaneously up to 6 kV.
• Fully Class-A compliant: conduct tests according to the stringent international IEC 61000-4-30 Class-A standard.
• Mains signaling: measure interference from ripple control signals at specific frequencies.
• Troubleshoot real-time: Analyze the trends using the cursors and zoom tools.
• Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
• Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex designed to fit into the tightest places.
• Automatic Trending: Every measurement is always automatically recorded, without any set-up.
• System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard.
• Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals.
• View graphs and generate reports: With included analysis software.
• Battery life: Seven hours operating time per charge on Li-ion battery pack.

Features Fluke 434 3 Phase

• Troubleshoot real-time: Analyze the trends using the cursors and zoom toolsﾗeven while background recording continues
• Highest safety rating in the industry: 600 V Cat IV/1000 V CAT III rated for use at the service entrance
• Automatic transient mode: Captures 200 kHz waveform data on all phases simultaneously: Up to 6 kV
• Fully Class A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class A standard
• Measure all three phases and neutral: With included four current probes
• AutoTrend: Every measurement you see is always automatically recorded, without any setup
• System-monitor: Up to seven power quality parameters on one screen according to EN50160 power quality standard
• Inrush mode: For troubleshooting nuisance circuit breaker tripping
• View graphs and generate reports: With included analysis software
• Logger function: Configure for any test condition with memory for over 400 parameters at user defined intervals
• Mains signaling: Measure interference from ripple control signals at specific frequencies
• Battery Life: Seven hours operating time per charge on NiMH battery pack
• Warranty: Rugged, handheld troubleshooter with 90 Day warranty

Additional Information

Installed Options:
– Transients
– Inrush
– Interharmonics
– Energy
– Memory
– Mains Signaling

Specifications Fluke 434 3 Phase

Package include :

• Fluke 434 HandHeld Power Quality Analyzer
  • Installed Options:
    • Transients
    • Inrush
    • Interharmonics
    • Energy
    • Memory
    • Mains Signaling
• (4) Fluke i400S AC Current Clamps
• AC Adapter/Charger
• User Manual On CD-ROM
• Carrying Case